SSEG commissioning · Cape Town, Western Cape and South Africa
SSEG commissioning and sign-off in Cape Town.
Your grid-tied solar PV or battery system is installed. Before the City of Cape Town or Eskom will let it operate, it has to be commissioned and the report signed by an ECSA-registered professional. We test it, report it and sign it, and our Pr. Tech. Eng. sign-off is accepted by the City of Cape Town.
Why SSEG commissioning matters
Small-scale embedded generation (SSEG) is any generator connected to your side of the meter: Rooftop solar PV, a hybrid inverter with batteries, or a generator that can run in parallel with the grid. The utility needs proof that it is safe for the people working on its network, that it disconnects when the grid goes down, and that it behaves as the application says it will.
That proof is the commissioning report. Until it is accepted, the system is not authorised to operate, and an unauthorised system can mean penalties, a disconnected supply or a refused feed-in tariff.
Who it's for
Homeowners whose installer has finished but whose application is stuck. Business owners with rooftop PV, backup batteries and generators. Industrial sites with larger arrays, export limiting and protection settings to prove. And installers who need an independent registered professional to sign their commissioning reports.
Homeowners
Your installer has finished and the inverter is running, but the municipality has not approved the connection yet. We check the paperwork, test the system on site, and sign the commissioning report so your application can go in complete the first time.
Business owners
Offices, retail, farms and hospitality sites with rooftop PV, backup batteries and generators. We test how the inverter, the backup supply and the grid behave together, so the system that saves you money doesn't become the one that trips you offline.
Industrial sites
Larger arrays, export limiting, protection settings and interfaces with existing MV and LV distribution. We commission against the utility's requirements and report what your engineering team needs for the long run, not just what the application form asks for.
- Document check
- Single-line diagram, inverter approval and NRS 097-2-1 certificate, protection settings, export or non-export configuration, and the application pack.
- On-site tests
- Loss-of-mains (anti-islanding) behaviour, export limiting where required, isolation and protection, earthing and bonding, DC isolation, backup changeover and labelling.
- Professional sign-off
- The commissioning report completed and signed as a registered Pr. Tech. Eng., ready to submit with your installer's Certificate of Compliance.
- A straight answer if it isn't ready
- A plain list of what must be fixed before a re-test. We have no stake in who fixes it.
The installer and the registered electrical contractor stay responsible for the installation and the Certificate of Compliance. The utility grants permission to connect.
What to have ready
- Your SSEG application or reference number from the City, municipality or Eskom
- The installer's Certificate of Compliance for the installation
- A single-line diagram of the system as installed
- Inverter make and model, and its NRS 097-2-1 certificate
- Battery and backup details, and whether the system exports
- Safe access to the inverter, DB boards and the point of connection
Still planning the system? Cut the waste first.
A system sized on a wasteful load costs more and pays back later. An Energy Loss Audit shows the load you actually need to supply, so the PV and battery are sized on what matters.
SSEG commissioning questions
Is SSEG commissioning required in Cape Town?
Yes. Grid-connected small-scale embedded generation in Cape Town must be authorised by the City before it operates, including systems that don't export. A commissioning report signed by a registered professional is part of that process.
Who can sign the SSEG commissioning report?
The City of Cape Town asks for an ECSA-registered professional. Bramwill Bruinders is a registered Pr. Tech. Eng., and his sign-off is accepted by the City of Cape Town.
Can you commission a system someone else installed?
Yes. Most of our SSEG work is on systems installed by others. The installer stays responsible for the installation and the Certificate of Compliance; we test, report and sign.
What happens if the system fails a test?
You get a plain list of what must be fixed before a re-test. We have no stake in who fixes it.
Do you commission SSEG outside Cape Town?
Yes, for Eskom customers and other municipalities in the Western Cape and across South Africa. Requirements differ by utility, and we work to the one your system connects to.
What does SSEG commissioning cost?
It depends on the system size, battery and backup arrangement, and location. Send us the system size, inverter model and your municipality, and we will quote on a written scope.
Get your system signed off.
Tell us where things stand. If it's a fit, we'll reply with a proposed written scope. If it isn't, we'll say so and, where we can, point you to someone who is.
Prefer to talk first? Call +27 66 252 2655 or email consultant@bynergex.com.
Energy Loss Audit
Bills and tariff review, at least 7 days of load logging, a power quality screening and a costed savings plan.
Compliance and project assurance
One stage or the whole lifecycle: Requirements, tender review, delivery evidence and acceptance.
SSEG commissioning
Document check, on-site tests and a signed commissioning report for homes, businesses and industrial sites.
Every engagement is quoted on a written scope after a short conversation. No scope, no invoice.
